Description

The Lagoon water feature combines the warmth of rustic texture with a timeless design, making it an impressive feature piece for any garden. Effortless to set up, this piece is both a visual and sensory delight.
–
Please note all water features are handmade and so the design is a variation of the photo.
–

Looking after your water feature

The pump should be connected to the mains supply via an RCD unit, available from any major DIY or hardware store. When used outdoors, the mains should be inside a waterproof outlet. If in doubt contact a qualified electrician.
–
General Care

• The pump must remain fully submerged at all times. Do not allow the water to run dry.

• The pump flow dial can be adjusted to alter the height of the water plume and soundscape.

• Ensure that water does not splash outside the feature, which could cause it to drain too quickly.

• To maintain performance, keep the pump intake clear of debris.

• The water feature should be setup on a level surface.

• Always maintain the water level above the pump and below the cable hole. The height of the water will change the sound from the water feature.

• In hot weather, water will evaporate and the water level needs to be checked more frequently.

• Use normal tap water without any additives, clean and remove lime scale as required. Unplug the pump when cleaning.

Winter Maintenance
The water feature must not be used outside in freezing conditions. Empty the water feature and store inside.